Generator Assembly Overview

Generator Assembly Overview





1 - Angle bracket

2 - Socket head bolts

• M6 x 0.98 in

• 9 Nm

3 - Coolant pipe

4 - Clamp

5 - Coolant hose

• Connection diagram for coolant hoses.
6 - O-Ring

• Replace

7 - Generator

• B+ wire fastener to generator, 15 Nm --> [ B+ Cable Mount to Generator ] Description and Operation

• Neither the voltage regulator nor the carbon brushes can be replaced individually; if a repair is required, the entire generator must be replaced.

• Generator, removing and installing --> [ Generator ] Generator

• Generator ribbed belt pulley, removing and installing --> [ Generator Ribbed Belt Pulley ] Generator Ribbed Belt Pulley

8 - Ribbed belt

• Ribbed belt, checking --> [ Ribbed Belt, Checking ] Initial Inspection and Diagnostic Overview

• Ribbed belt routing --> [ Ribbed Belt Routing ] Ribbed Belt Routing

9 - Socket head bolt with washer

• M8 x 3.54 in

• 22 Nm