Installation

STEERING COLUMN: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH LH

(a) Connect the connector to install the steering pad switch LH to the steering pad switch RH.

(b) Align a new clamp with the groove and install it as shown in the illustration.





Text in Illustration





NOTICE:
Make sure to install the clamp in the correct direction.

(c) After installation, cut off the excess length of the clamp within the specified range *c shown in the illustration.

2. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the 2 claws to install the steering pad switch assembly (RH side) to the steering wheel sub-assembly.

(b) Install the 2 screws.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

(c) Engage the 2 claws to install the steering pad switch assembly (LH side) to the steering wheel sub-assembly.

(d) Install the 2 screws.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

(e) Connect the steering pad switch assembly connector to the spiral cable sub-assembly.

3. INSTALL HORN BUTTON ASSEMBLY

Installation