On Vehicle Inspection of Distributor
ON-VEHICLE INSPECTION OF DISTRIBUTOR1. INSPECT DISTRIBUTOR CAP AND ROTOR.
a. Check for cracks, carbon tracks, burnt or corroded terminals.
b. Check the distributor center contact for wear. If a problem is found, replace the component.
ESA System Circuit:
2. CHECK PICKUP COIL: Using an ohmmeter, check each resistance of the two pick- up coils.
a. G pickup coil resistance: G-G 140-18O ohms.
b. Ne pickup coil resistance: Ne-G 140-18O ohms.
c. If the resistance is not correct, replace the distributor.