Operation CHARM: Car repair manuals for everyone.

Test B: Blower Off Relay Test

Measure the voltage to ground at the following terminals of the Blower Off Relay. Leave the connector on the relay.


Test Blower Off Relay Test:






^ If all the voltages are correct except at terminal B, install a new Blower Off Relay.
^ If Battery voltage is not at terminal A or terminal D, check for an open in the BRN wire (50) back to Fuse 7.
^ If voltage at terminal C is incorrect, check BRN/WHT or DK BLU and WHT/BLK wires (964) for an open or short to ground. If wire is good, install a new Heater and A/C Control Assembly.