LH&RH Front Window Anti-Pinch

POWER WINDOW MAIN SWITCH


Removal and Installation


REMOVAL
1. Remove the front door grip cover. Exploded View.





2. Remove the main power window/door lock switch locking clip
(A).





3. Using a suitable tool, release the metal clip and lift the main power window/door lock switch and finisher as an assembly upward to remove it from the front door finisher.
Broken Square Indicates Metal clip
Broken Circle Indicates Pawl

CAUTION:
Wrap a cloth around suitable tool to protect components from damage.
4. Disconnect the harness connector.
5. Release the pawls on each side, then separate the switch finisher (1) from the main power window/door lock switch (2) and remove.

CAUTION:
Do not fold the pawl of the main power window/door lock switch finisher.

INSTALLATION
Installation is in the reverse order of removal.

NOTE:
After every switch harness disconnection, it is necessary to perform the initialization procedure. LH&RH Front Window Anti-Pinch.