Operation CHARM: Car repair manuals for everyone.

Special Repair Requirement




INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement


INITIALIZATION PROCEDURE

After installing each component, perform the following procedure to reset the limit switch.





1.Raise the glass to the top position.
2.While pressing and holding the reset switch, lower the glass to the bottom position.
3.Release the reset switch. Verify that the reset switch returns to the original position, if not, pull the switch using suitable tool.
4.CAUTION:
Do not operate the glass automatically to raise the glass to the top position.

Raise the glass to the top position.