Ignition Switch Mechanical Test
NOTE: Do not apply lubricant to the inside of the ignition switch.Test the mechanical operation of the ignition switch by rotating the ignition switch through all positions. The movement should feel smooth with no sticking or binding. The ignition switch should return from the START position back to the RUN position without assistance (spring return). If sticking or binding is encountered, check the following:
- Burrs on the key.
- Binding ignition switch lock cylinder.
- Steering column shroud rubbing against the ignition switch lock cylinder.
- Burrs or foreign material around the rack-and-pinion actuator in the steering column lock cylinder housing.
- Insufficient lubricant on the actuator.
- Binding ignition switch.