Operation CHARM: Car repair manuals for everyone.

Removal and Installation

A/T (AWD) AND M/T MODELS

Removal
1. Disconnect the battery cable from the negative terminal.
2. Remove engine undercover, using power tools.
3. Remove radiator cooling fan assembly. Refer to "COOLING FAN".
4. Remove alternator and power steering pump belt. Refer to "Removal and Installation"




5. Remove oil pressure switch harness clip from alternator stay.
6. Disconnect oil pressure switch connector.
7. Remove alternator stay mounting bolts and alternator stay, using power tools.
8. Remove alternator mounting bolt, using power tools.




9. Disconnect alternator connector.
10. Remove "B" terminal nut.
11. Remove harness clip and water hose bracket from alternator.
12. Remove alternator assembly downward from the vehicle.

ALTERNATOR PULLEY INSPECTION
Perform the following.
- Make sure that alternator pulley does not rattle.
- Make sure that alternator pulley nut is tight.

Alternator pulley nut: Torque 118 Nm (12.0 kg-m, 87 ft-lb)

Installation
Installation is the reverse order of removal.
- Install alternator, and check tension of belt. Refer to "Checking Drive Belts".

CAUTION: Be sure to tighten "B" terminal nut carefully.