Intake Manifold Tuning Valve Actuator Solenoid Replacement
Intake Manifold Tuning Valve Actuator Solenoid Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Disconnect the intake manifold tuning (IMT) valve solenoid connector.
3. Disconnect the vacuum hose from the IMT solenoid.
4. Remove the IMT solenoid.
Installation Procedure
1. Install the IMT solenoid.
2. Connect the vacuum hose to the IMT solenoid.
3. Connect the IMT solenoid connector.
4. Connect the negative battery cable.