Left Catalytic Converter

Left Catalytic Converter

Removing






• The transmission is removed.

• When installing, bring all cable ties back to same positions.

- Remove the - 3 - Oxygen Sensor (O2S) 2 after catalytic converter (G131) connector from the bracket, disconnect it and free up the wire.

• Ignore - 1 and 2 -.

- Remove the nuts - arrows - and the left catalytic converter.






• Ignore - 1 -.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Muffler Overview ] Muffler Overview.

• Replace the seals and self-locking nuts.