Generator with Bushings Overview
Generator with Bushings Overview
Observe notes on contact corrosion. Refer to=> [ Contact Corrosion ] Contact Corrosion.
1 Bolt
• 23 Nm
2 Generator
• Removing and installing:
• 3.0L TFSI engine, refer to => [ Generator ] Generator.
• 4.0L TFSI engine, refer to => [ Generator ] Generator.
• 4.2L FSI engine, refer to=> [ Generator ] Generator.
• 6.3L FSI engine, refer to=> [ Generator ] Generator.
• 3.0L TDI engine, refer to => [ Generator ] Generator
3 Terminal 30/B+
4 Nut
• 16 Nm
5 Cap
• Depending on the vehicle equipment level.
6 Electrical Connector
7 Coolant Return Pipe
8 Screw
• 9 Nm
9 Retaining Plate
• For the coolant pipes.
10 Coolant Supply Pipe
11 O-rings
• Replace
12 Bushing
• Because the clamping force of a tight socket is too low despite the correct torque, loosen sockets.