Evaporative Emissions System: Service and Repair

Evaporative Emission Canister System Overview






1 Air Filter

• For the fuel tank pressure sensor (G400)

• Installed location: Under wheel housing liner in the right rear wheel housing

• Removing and installing, refer to => [ Fuel Tank Pressure Sensor (G400), Air Filter ] Fuel Tank Pressure Sensor (G400), Air Filter

2 Clamp

• Must be appropriate for the model type. Refer to the Electronic Parts Catalog (ETKA).

3 Connecting Hose

4 Fuel Tank Pressure Sensor (G400)

• Installed location: Under wheel housing liner in right rear wheel housing

• Checking in Guided Fault Finding using the vehicle diagnosis tester

• Removing and installing, refer to => [ Fuel Tank Pressure Sensor (G400) ] Fuel Tank Pressure Sensor (G400)

5 Evaporative Emission (EVAP) Canister

• Installed location: Under wheel housing liner in right rear wheel housing

• Removing and installing, refer to => [ Evaporative Emission Canister ] Service and Repair

6 Bolt

• 20 Nm

• Quantity: 3

7 Vent Line

• From the fuel tank

• To disconnect, press release button on connection piece

8 Vent Line

• To EVAP canister purge regulator valve 1 (N80)

• To disconnect, press release button on connection piece

• Clipped to the bracket

9 Clamp

• Must be appropriate for the model type, refer to the Electronic Parts Catalog (ETKA)

10 Ventilation Line

• To the air filter for the fuel tank pressure sensor

11 Bracket

12 Fuel Tank Leak Detection Control Module (J909)

• Installed location: front right at fuel tank

• Removing and installing, refer to => [ Fuel Tank Leak Detection Control Module (J909) ] Fuel Tank Leak Detection Control Module (J909)

13 Nut

• 1.6 Nm

• Quantity: 2

14 Bolt

• 4 Nm

• Quantity: 6

15 Bolt

• 4 Nm