Operation CHARM: Car repair manuals for everyone.

Rear Door Window







Rear Door Window

Special tools, testers and auxiliary items required

• Removal Tool (T40231)

• Release Tool (T40254)

Remove The Door Window With Standard Glass






- Remove the door trim..

- Remove the inner window shaft strip. Refer to => [ Window Shaft Strip, Outer and Inner, Overview ] Service and Repair.

- Remove the inner door panel cover. Refer to => [ Inner Door Panel Cover ] Inner Door Panel Cover.

- Insert the (T40231) on both side of the door window and push it downward on the mount on the window regulator - 1 -.

- The mount on the window regulator bends open so that the door window can bee lifted upward by the mounting pin.

- Remove the door window - 2 - upward out of the mount and remove it from the door.

Removing A Door Window With Tinted Glass






- Insert the (T40254) in direction of arrow completely onto the adapter - arrow -.

- The mount on the window regulator bends open so that the door window can bee lifted upward by the mounting pin.

Door Window, Installing

• The mounting pins must be pushed in first with new door windows with standard glass.

- Install the mounting pins - 1 - in the center of the door window - 2 - and push the clamping pin in so that it is flush.






- Insert door window - 1 - diagonally toward back in door window guide.






- Line up the door window inside the window guides and push it down. Make sure the door window move exactly into the front and rear mount.

- Press window down into window regulator mount.

- The mounting pins will audibly lock into the mount.