End Plate

End Plate

Removing






- Remove front wheel housing liner. Refer to => [ Front Wheel Housing Liner ] Front Wheel Housing Liner.

- Left side: remove the windshield washer fluid reservoir.

- Remove the expanding rivets - 4 -.

- Remove the guide - 3 - on the top of the fender end plate from the fender - 2 -.

- Remove the end plate - 1 - forward starting at the bottom.

Installing






• For the correct tightening specifications, refer to => [ Fender Overview ] Fender Overview.

Install in reverse order of removal. Note the following:

- The guide - 1 - on the top of the end plate - 2 - must be pushed onto the fender - 3 -.

- Left side: install the windshield washer fluid reservoir.

- Install the front wheel housing liner. Refer to => [ Front Wheel Housing Liner ] Front Wheel Housing Liner.