Operation CHARM: Car repair manuals for everyone.

Shift Mechanism Cover and Securing Frame With Selector Lever Boot







Shift Mechanism Cover and Securing Frame with Selector Lever Boot

Special tools, testers and auxiliary items required

• Hose Clamp Pliers (V.A.G 1275)





Removing and Installing





1 Shift Mechanism Cover

• For automatic transmission

• Version I: removing and installing => [ Version I: Removing and Installing the Selector
Lever Cover ]

• Version II: removing and installing => [ Version II: Removing and Installing the Selector
Lever Boot and Cover ]

2 Shift Mechanism Cover

• For manual transmission

3 Selector Lever Boot

• Connected firmly with securing frame - 5 -

4 Shift Knob

• Removing and installing together with securing frame => [ (Item 5) Securing Frame ]

5 Securing Frame

Removing

- Unclip securing frame - 5 -.

- Undo securing clip - 6 -.

- Remove selector lever boot with shift knob and securing frame.

Installation

- Place shift knob - 4 - on selector lever.

- Firmly press shift knob - 4 - down.

- Close the clamp - 6 - with Hose Clamp Pliers (V.A.G 1275).

- Clip securing frame - 5 - into shift mechanism cover.

6 Clamp

• Replace after each disassembly

Cover with Selector Lever Boot, Removing And Installing





- Open ashtray in center console.

- Remove cover - 1 - with selector lever boot - 2 - upward.

To install, perform the steps used in removal in reverse order.

Version I: Removing and Installing the Selector Lever Cover





- Open ashtray in center console.

- Remove selector lever cover upward - arrows -.

To install, perform the steps used in removal in reverse order.

Version II: Removing and Installing the Selector Lever Boot and Cover





- Unclip selector lever boot - 1 - on both sides and remove upward - arrows -.

- Grasp through opening and remove cover - 1 - upward - arrows -.





- Disconnect electrical connector.

To install, perform the steps used in removal in reverse order.