Clean Working Conditions

Clean Working Conditions

• Thoroughly clean all connections and the surrounding area before disconnecting.

• Clean the transmission and transmission components using cleaning solution (D 009 401 04).

• Use lint-free cloths when cleaning. Audi recommends the cloth "WYPALL X70/WORKHORSE" made by Kimberly-Clark Professional.

• Place parts that have been removed on a clean surface and cover. Use foils and paper. Use lint-free cloths only!

• Carefully cover over opened components or seal, if repairs are not carried out immediately.

• Only install clean components: Only unpack replacement parts immediately prior to installation.

• Protect disconnect electrical connectors from dirt and moisture and only connect when they are dry.