Operation CHARM: Car repair manuals for everyone.

Right Luggage Compartment Relay and Fuse Panel






Right Luggage Compartment Relay and Fuse Panel

Removing

- With ignition switched off, disconnect battery Ground (GND) cable. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove right luggage compartment side trim cover.

- Release retaining springs - arrows A - and pull comfort system central control module (J393) downward out of relay and fuse panel - arrow B -.





• Ignore items - 1 to 3 -.

- Unclip harness connectors - 4 - and bracket - 3 - for additional fuses at relay and fuse panel.





- Remove relay - 2 - or control modules, then unclip respective relay carrier.

- Release retaining springs - arrows - and open cover - 1 -.

Sedan

- On vehicles with parking aid, remove right side trim.

- Release clip - arrow A - and swivel parking aid control module (J446) - 4 - out of mounting frame - arrow B -.





- Connectors - 1 through 3 - remain connected.

- Remove the bolts and nuts - arrows -.





- Remove mounting frame - 1 - for control modules.

• Towing recognition control module (J345) does not need to be removed.

Vehicles with Car Jack Bracket

- Remove car jack from bracket.

- Remove nuts - 1 - and - 2 - and bolt - 3 -.





- Remove car jack bracket.

All

- Remove wires - 1 through 3 -.





- Remove nuts - arrows - and remove relay and fuse panel.

- Release retaining springs - arrows - and press fuse panels - 1 - and - 2 - toward rear out of relay and fuse panel.





• For exact assignment of relay and fuse panel in right luggage compartment, refer to current wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Connect battery. Required actions => [ Vehicles with : ] Battery, Disconnecting and Connecting.

Tightening Specifications