Computers and Control Systems: Locations
Component Location Overview
Part 1 - R8 Coupe
1 Mass Airflow Sensor 2 (G246)/ Intake Air Temperature Sensor 2 (G299)
• Removing and installing, refer to => [ Mass Air Flow Sensors ] Service and Repair
2 Oxygen Sensor 2 after Catalytic Converter (G131) with Heater for Oxygen Sensor 2 after Catalytic Converter (Z30)
• Component location
• Connector location
• Removing and installing, refer to => [ Oxygen Sensors ] Oxygen Sensors
3 Engine Speed Sensor (G28)
• Component location
• Removing and installing, refer to => [ Engine Speed Sensor ] Service and Repair
• 9 Nm
4 Heated Oxygen Sensor 2 (G108) before catalytic converter with Oxygen Sensor 2 Heater (Z28)
• Component location
• Connector location
• Removing and installing, refer to => [ Oxygen Sensors ] Oxygen Sensors
5 Throttle Valve Control Module 2 (J544)
• 9 Nm
• After replacing, perform an adaptation in guided functions
6 Engine Control Module 2 (J624)
• Component location
• Removing and installing, refer to => [ Engine Control Module 2 ] Engine Control Module 2
7 Secondary Air Injection Pump Motor 2 (V189)
• Secondary air injection pump relay 2 (J545)
8 Engine Control Module (J623)
• Component location
• Removing and installing, refer to => [ Engine Control Module ] Engine Control Module
9 Throttle Valve Control Module (J338)
• 9 Nm
• After replacing, perform an adaptation in guided functions
10 Heated Oxygen Sensor (G39) before Catalytic Converter with Oxygen Sensor Heater (Z19)
• Component location
• Connector location
• Removing and installing, refer to => [ Oxygen Sensors ] Oxygen Sensors
11 Oxygen Sensor after Three Way Catalytic Converter (G130) with Heater for Oxygen Sensor 2 after Catalytic Converter (Z29)
• Component location
• Connector location
• Removing and installing, refer to => [ Oxygen Sensors ] Oxygen Sensors
12 Exhaust Flap Valve 1 (N321)
13 Secondary Air Injection Pump Motor (V101)
• Secondary air injection pump relay (J299)
14 Mass Airflow Sensor (G70)/ Intake Air Temperature Sensor (G42)
• Removing and installing, refer to => [ Mass Air Flow Sensors ] Service and Repair
Part 1 - R8 Spyder
1 Secondary Air Injection Pump Motor 2 (V189)
• Secondary air injection pump relay 2 (J545)
2 Engine Control Module 2 (J624)
• Component location
• Removing and installing, refer to => [ Engine Control Module 2 ] Engine Control Module 2
3 Oxygen Sensor 2 after Catalytic Converter (G131) with Heater for Oxygen Sensor 2 after Catalytic Converter (Z30)
• Component location
• Connector location
• Removing and installing, refer to => [ Oxygen Sensors ] Oxygen Sensors
4 Engine Speed Sensor (G28)
• Component location
• Removing and installing, refer to => [ Engine Speed Sensor ] Service and Repair
• 9 Nm
5 Heated Oxygen Sensor 2 (G108) before catalytic converter with Oxygen Sensor 2 Heater (Z28)
• Component location
• Connector location
• Removing and installing, refer to => [ Oxygen Sensors ] Oxygen Sensors
6 Throttle Valve Control Module 2 (J544)
• After replacing, perform an adaptation in guided functions
• 9 Nm
7 Throttle Valve Control Module (J338)
• After replacing, perform an adaptation in guided functions
• 9 Nm
8 Heated Oxygen Sensor (G39) before Catalytic Converter with Oxygen Sensor Heater (Z19)
• Component location
• Connector location
• Removing and installing, refer to => [ Oxygen Sensors ] Oxygen Sensors
9 Oxygen Sensor After Three Way Catalytic Converter (G130) with Heater For Oxygen Sensor 1 After Catalytic Converter (Z29)
• Component location
• Connector location
• Removing and installing, refer to => [ Oxygen Sensors ] Oxygen Sensors
10 Engine Control Module (J623)
• Component location
• Removing and installing, refer to => [ Engine Control Module ] Engine Control Module
11 Exhaust Flap Valve 1 (N321)
12 Secondary Air Injection Pump Motor (V101)
• Secondary air injection pump relay (J299)
13 Mass Airflow Sensor (G70)/ Intake Air Temperature Sensor (G42)
• Removing and installing, refer to => [ Mass Air Flow Sensors ] Service and Repair
14 Mass Airflow Sensor 2 (G246)/ Intake Air Temperature Sensor 2 (G299)
• Removing and installing, refer to => [ Mass Air Flow Sensors ] Service and Repair
Part 2
1 Exhaust Camshaft Adjustment Valve 2 (N319)
2 EVAP System Purge Regulator Valve 2 (N333)
3 Left Electrohydraulic Engine Mount Solenoid Valve (N144)
• Component location
4 Fuel Metering Valve 2 (N402)
5 Camshaft Position Sensor 4 (G301)
• Removing and installing, refer to => [ Camshaft Position Sensors ] Service and Repair
• 10 Nm
6 Camshaft Position Sensor 2 (G163)
• Removing and installing, refer to => [ Camshaft Position Sensors ] Service and Repair
• 10 Nm
7 Intake Manifold Runner Position Sensor 2 (G512)
• After replacing, perform an adaptation in guided fault finding under adapting position sensor for channel separating plates
8 Engine Coolant Temperature Sensor (G62)
9 Intake Manifold Runner Position Sensor (G336)
• After replacing, perform an adaptation in guided fault finding under adapting position sensor for channel separating plates
10 Camshaft Position Sensor (G40)
• Removing and installing, refer to => [ Camshaft Position Sensors ] Service and Repair
• 10 Nm
11 Camshaft Position Sensor 3 (G300)
• Removing and installing, refer to => [ Camshaft Position Sensors ] Service and Repair
• 10 Nm
12 Fuel Metering Valve (N290)
13 Right Electrohydraulic Engine Mount Solenoid Valve (N145)
• Component location
14 EVAP Canister Purge Regulator Valve 1 (N80)
15 Exhaust Camshaft Adjustment Valve 1 (N318)
16 Camshaft Adjustment Valve 1 (N205)
17 Secondary Air Injection Sensor 1 (G609)
18 Intake Manifold Runner Control Valve (N316)
19 Secondary Air Injection Solenoid Valve (N112)
• Depending the version: with secondary air injection solenoid valve 2 (N320)
20 Secondary Air Injection Sensor 2 (G610)
21 Camshaft Adjustment Valve 2 (N208)
Part 3
1 Cylinder 10 Fuel Injector (N300)
• Removing and installing, refer to => [ Fuel Injectors ] Fuel Injectors
2 Ignition Coil 10 with Power Output Stage (N328)
• Removing and installing, refer to => [ Ignition Coils ] Service and Repair
3 Cylinder 9 Fuel Injector (N299)
4 Ignition Coil 9 with Power Output Stage (N327)
5 Cylinder 8 Fuel Injector (N86)
6 Ignition Coil 8 with Power Output Stage (N326)
7 Cylinder 7 Fuel Injector (N85)
8 Ignition Coil 7 with Power Output Stage (N325)
9 Cylinder 6 Fuel Injector (N84)
10 Ignition Coil 6 with Power Output Stage (N324)
11 Knock Sensor 3 (G198)
• Component location
• Removing and installing, refer to => [ Knock Sensors ] Service and Repair
12 Oil Temperature Sensor 2 (G664)
13 Knock Sensor 1 (G61)
• Component location
• Removing and installing, refer to => [ Knock Sensors ] Service and Repair
14 Ignition Coil 1 with Power Output Stage (N70)
15 Cylinder 1 Fuel Injector (N30)
16 Ignition Coil 2 with Power Output Stage (N127)
17 Cylinder 2 Fuel Injector (N31)
18 Ignition Coil 3 with Power Output Stage (N291)
19 Cylinder 3 Fuel Injector (N32)
20 Ignition Coil 4 with Power Output Stage (N292)
21 Cylinder 4 Fuel Injector (N33)
22 Ignition Coil 5 with Power Output Stage (N323)
23 Cylinder 5 Fuel Injector (N83)
24 Knock Sensor 2 (G66)
• Component location
• Removing and installing, refer to => [ Knock Sensors ] Service and Repair
25 Fuel Pressure Sensor (G247)
• Removing and installing, refer to => [ Fuel Pressure Sensors ] Service and Repair
26 Electrical Harness Connector
• Orange
• Component location
• For Knock Sensor 1 (G61)
27 Electrical Harness Connector
• Green
• Component location
• For Knock Sensor 2 (G66)
28 Electrical Harness Connector
• Gray
• Component location
• For Knock Sensor 4 (G199)
29 Electrical Harness Connector
• brown
• Component location
• For Knock Sensor 3 (G198)
30 Low Fuel Pressure Sensor (G410)
31 Fuel Pressure Sensor 2 (G624)
• Removing and installing, refer to => [ Fuel Pressure Sensors ] Service and Repair
32 Knock Sensor 4 (G199)
• Component location
• Removing and installing, refer to => [ Knock Sensors ] Service and Repair
Engine Control Module (J623) Component Location - R8 Coupe
1. Connector
2. Metal Retainer
3. Engine control module (J623)
• Under the right engine compartment trim panel
Removing and installing, refer to => [ Engine Control Module ] Engine Control Module.
Engine Control Module 2 (J624) Component Location - R8 Coupe
1. Connector
2. Metal Retainer
3. Engine control module 2 (J624)
• Under the left engine compartment trim panel
Removing and installing, refer to => [ Engine Control Module 2 ] Engine Control Module 2.
Engine Control Module (J623) Component Location - R8 Spyder
1. Connector
2. Metal Retainer
3. Engine control module (J623)
• In the right side of the engine compartment
Removing and installing, refer to => [ Engine Control Module ] Engine Control Module.
Engine Control Module 2 (J624) Component Location - R8 Spyder
1. Connector
2. Metal Retainer
3. Engine control module 2 (J624)
• Inside the engine compartment on the left side
Removing and installing, refer to => [ Engine Control Module 2 ] Engine Control Module 2.
Engine Speed Sensor (G28)
1. Bolt for the engine speed sensor (G28) bracket
2. Electrical harness connector
• On the left of the transmission housing
Removing and installing, refer to => [ Engine Speed Sensor ] Service and Repair.
Left/Right Electrohydraulic Engine Mount Solenoid Valve (N144)/ (N145)
1. Bolt for the left engine mount
2. Electrical harness connector
Installed Location Inside the 9-Pin Relay and Fuse Panel
1 Motronic engine control module power supply relay (J271)
2 Auxiliary engine coolant pump relay (J496)
3 Starter relay (J53)
4 Starter relay 2 (J695)
5 Secondary air injection pump relay (J299)
6 Engine component power supply relay (J757)
8 Secondary air injection pump relay 2 (J545)
Knock Sensors
1 Knock sensor 4 (G199)
2 Knock sensor 3 (G198)
3 Knock sensor 1 (G61)
4 Knock sensor 2 (G66)
5 Knock sensor 1 (G61) connector
6 Knock sensor 2 (G66) connector
7 Knock sensor 4 (G199) connector
8 Knock sensor 3 (G198) connector
Oxygen Sensors Location, Cylinder Bank 1 (right)
1. Oxygen sensor after three way catalytic converter (G130)
2. Heated oxygen sensor (G39) (before catalytic converter)
For removing and installing, refer to => [ Oxygen Sensors ] Oxygen Sensors
Right Cylinder Bank 1 Oxygen Sensor Connectors
1. For oxygen sensor 2 after catalytic converter (G130)
2. For the heated oxygen sensor 4 (G39) before the catalytic converter
Oxygen Sensors Location, Cylinder Bank 2 (left)
1. Heated oxygen sensor 2 (G108) (in front of catalytic converter)
2. Oxygen sensor 2 after catalytic converter (G131)
for removing and installing, refer to => [ Oxygen Sensors ] Oxygen Sensors
Left Cylinder Bank 2 Oxygen Sensor Connectors
1. For oxygen sensor 2 after catalytic converter (G131)
2. For heated oxygen sensor 2 (G108) (in front of catalytic converter)