Starter Motor: Service and Repair

Starter

Special tools, testers and auxiliary items required

• Scissor Lift Table (VAS 6131)

Removing





- Remove engine.

- Leave transmission with engine installed on (VAS 6131).

- Remove bolt - arrow -.

- Remove bracket for connectors - 1 through 4 - from subframe.

- Remove bolts - arrows - at front left and right transmission mounts.





- Twist spindles of support elements left and right at subframe completely downward.





- Remove both base plates of attachments for subframe from (VAS 6131).

- Remove attachments.

- Remove subframe to side.

- Turn the spindles for support elements - 1 - (left and right) at engine support - 4 - all the way down.

- Remove bolts - arrows - at left and right engine mounts.





- Remove engine support.

- Remove electrical wiring bracket on right engine support - arrow -.





- Disconnect connector - arrow - at left engine mount.





- Remove bolts - 1 through 4 - and remove engine support with engine mount.

- Disconnect ground cable - 4 - from starter.





- Disconnect electrical wires - 2 - and - 3 - from starter.

- Remove bolts - 1 - and - 5 - and remove starter.

Installing

Install in reverse order of removal, observing the following:

- Install engine.

Tightening Specifications