Air Injection Pump: Service and Repair

Secondary Air Injection Pump Motor

• Before raising the vehicle on a hoist (wheels off the ground), activate the vehicle lift mode.

Removing

- Remove the noise insulation fasteners - 1 - and noise insulation.





- Disconnect the air hose - 1 -.





- Disconnect the air hose - 2 -.

- Disconnect the electrical connector - 1 -.





- Remove the Secondary Air Injection (AIR) pump motor (V101) nuts - arrows -.

Installing

Installation is performed in the reverse order of removal, noting the following:

Tightening Specifications