Operation CHARM: Car repair manuals for everyone.

Battery Switch-Off Relay






Battery Switch-Off Relay

• Vehicle voltage supply is disrupted during an actuator test (as of software version S082 and S084, the knob is no longer triggered during an actuator test) or vehicle accident.

• Battery Switch-Off Relay (J655) disconnects the circuit electrically. The Battery Switch-Off Relay (J655) must always be replaced after a deployment.

Removing with knob





- Open cover - 8 -.

- Remove screw - 7 -.

- Unscrew pole - 3 -.

- Unscrew pole - 4 -.

- Unclip the connector - 6 - at the retaining tabs - 5 - (Qty. 2).

- Disconnect connector - 6 -.

• Installing

- Install battery pole disconnect element - 2 - in reverse order of removal.

Removing without knob





- Open cover - 7 -.

- Remove screw - 6 -.

- Unscrew pole - 3 -.

- Unscrew pole - 2 -.

- Unclip the connector - 5 - at the retaining tabs - 4 - (Qty. 2).

- Disconnect connector - 5 -.

Installing

- Install battery pole disconnect element - 1 - in reverse order of removal.